| Interface Description |
| interface | number | describe | purpose |
|
| PON | 1 | PON fiber optic interface, supporting SC/PC Type optical tail fiber connector. | Used for connecting PON access network optical signals |
|
| LAN | 1 | RJ-45 Ethernet interface, through which Connect the interface to the local network, LAN Port speed 10/100/1000Mbps Adaptive. | Connect to a computer, IP phone, or set-top box via Ethernet cable |
|
| RESET | 1 | Reset button. After the ONU is powered on, Press and hold the reset button for more than 8 seconds Clock, device automatically restores to factory default to configure | Restore factory settings |
|
| Power | 1 | DC power adapter interface | Restore factory settings |
|
| ON/OFF | 1 | Power switch button | Used to turn on and off devices. ON indicates that the device power is turned on, OFF indicates that the device is powered on Source shutdown |
|
| Equipment indicator light |
|
|
| pilot lamp | colour | describe |
|
| Power | Power indicator light | green | Always on: Equipment power supply is normal Extinguish: Abnormal power supply to the device |
|
| LOS | Light signal indicator light | red | Always on: PON port optical module power off |
|
|
|
|
| Blinking: The received light power is lower than the sensitivity of the light receiver Extinguish: The received light power is normal |
|
| PON | ONU registration indicator light | green | Always on: Registered to OLT device normally Flashing: During registration with OLT device Off: Registration to OLT failed or no normal optical signal input |
|
| LAN |
Network interface work Status indicator light | green | Always on: Port connection is normal but there is no data transmission Flashing: Port connection is normal and there is data transmission Extinguished: Port has no connection or abnormal connection |
|
| 技术参数 |
|
|
|
|
|
| parameter | specifications |
|
| 接口规格 | parameter | 1 PON interface EPON： Upstream 1.25Gbp s rate, downstream 1.25Gbp s rate SC single-mode single fiber Transmission distance: 20KM |
|
| user port | A 10/100/1000M adaptive Ethernet port Full duplex/half duplex RJ45 electrical port, supporting cross direct adaptive connection Transmission distance of 100 meter |
|
| power interface | 12V DC power supply interface |
|
| 性能规格 | PON optical port performance | Wavelength: 1290-1600 Transmitting optical power: 0-4dBm Receiving sensitivity:- 27dBm Saturated optical power:- 3dB |
|
| Data transmission performance | Ethernet port: 100Mbps or 1000Mbps Packet loss rate:< 1*10E-12 Transmission delay:< 1.5ms |
|
| Business Capability | Second layer line speed exchange Support VLAN TAG/UNTAG, VLAN conversion Support port speed limit Support business prioritizatio |
|
|
|
| Support broadcast packet suppression |
|
|
|
| Support loop detection |
|
| equipment management | management style | In addition to supporting RMS remote management and configuration requirements, it also supports OMCI or EMS remote management and configuration requirements for OAM |
|
| management function | Status monitoring, configuration management, alarm management, log management |
|
| Special performance | casing | White plastic shell |
|
| Power supply and power consumption | <5W 12V/0.5A power adapter |
|
| Size and weight | Equipment size: 107mm (L) * 85mm (W) * 26mm (H) Equipment weight: 0.26kg |
|
| Environmental parameters | Working temperature: 0-45 ℃ Storage temperature:- 10～75℃ Working humidity: 10% to 90% non condensing Storage humidity: 10% to 90% non condensing |
|
| Ordering Information |
|
|
|
|
| Product Name | Product Model | Descriptions |
|
| EPON ONU | EN10 | 1GE ONU equipment, manual, power adapter |
|
| Reliable provider of optical communication devices and solutions |
